ELO 1 (35 cm)

Product detailed description

The lightest cordless cylinder mower in the world. The mower is designed to be easy and effortless to use. The ELO 1 is a mower for regular mowing of low domestic lawns.

The precise, lightweight aluminum construction made from a single piece forms a frame that securely houses a top-of-the-line Li-Ion battery, a quiet BLDC motor, and ELO control electronics. Except for the cylinder and bottom blade, all parts of this cylinder mower are made of aluminum or plastic, achieving minimum weight while maintaining a precise cut and a robust construction.

The ELO 1 is equipped with a five-blade cylinder with cylinder adjustment relative to a fixed bottom blade. The motor brake stops the cylinder within three seconds, increasing safety during use.

The mower is equipped with an aluminum roller at the front, which protects the cutting mechanism from damage caused by obstacles or debris, and a large rear roller, which reduces the pressure of the mower on the lawn and creates classic lawn stripes. The rear roller is made of flexible polypropylene, which has excellent puncture and scratch resistance properties, and makes driving on pavement or concrete completely quiet and gentle. The mower has no drive, the rollers are mounted in bearings, which makes moving the mower very easy and comfortable.

The ELO 1 is controlled by simple, variable handlebars with a wide diameter for a comfortable and firm grip throughout mowing. The cylinder is started using a single lever and a safety button. All cables are routed internally, eliminating the risk of them getting caught on plants or other obstacles. When parking, the handlebars can be straightened to a position where they do not take up space, making the entire mower easy to park and saving space. The handlebars allow for an ergonomic grip for operators of any height, without any adjustment or fine-tuning. This makes it easy for users of different heights to take turns mowing without having to readjust the handlebars.

The height is adjusted using the front roller, which has locking screws on both sides of its bracket. The cutting height is from 15 to 50 mm. The mower's strength lies in its ability to mow taller grass and flowering dicotyledonous weeds very well.

The ELO 1 is available in two cutting widths – 35 and 45 cm. The narrower 35 cm model is designed for small lawns up to 150 m2 and the wider 45 cm model for lawns up to 300 m2. ELO 1 mowers have the great advantage of almost perfect trimming of lawn edges thanks to the narrow side panels of the frame and the absence of external wheels.

The PLUG-IN battery is charged using a charging connector on the side of the mower, which means that there is no need to remove the battery from the mower and insert it into the charger; simply insert the charger connector into the mower and the charger will take care of the rest. This has resulted in a significantly higher battery capacity, which is protected against damage in the mower frame, so there is no risk of damage due to falling or spilling liquids.

The Li-Ion battery charges from 0% to 80% in 120 minutes. It takes 150 minutes to fully charge from 0% to 100%. Charging is set with maximum consideration for battery life. During winter and periods when the mower is not in use, it is good to keep the battery charged at 30% to 80% of its capacity. An external ELO 1 plug-in meter set for the battery in ELO 1 can be used to measure the battery status. The ELO 1 battery is characterized by its ability to charge quickly during the first 30 minutes of charging, reaching 38% capacity in just 30 minutes.

The grass catcher is extremely lightweight, made of aluminum and covered with highly durable mesh to prevent tearing. The catcher can be easily handled with one hand, which significantly speeds up and facilitates emptying. The catcher is located in front of the mower, making it very easy to remove from the mower and replace. Thanks to its front location, taller operators have enough space even for long strides.

The mower's design follows its function, which is why it is modest and easy to read. In the eyes of the designers, it is a timeless product design that stands out from the crowd and will retain its appearance even after years of use.

The entire mower is developed and manufactured in the Czech Republic. Behind its development and production is lawn care expert and cylinder mower specialist Tomáš Šena and his team.

 Package contents: mower, charger, grass catcher, tools, manual.